Start with the symptom, not the part
When a Muse 2.0 Portable Lamp stops holding its usual runtime, the first instinct is often to order a new battery. That can be the right call, but only after you have separated a worn-out battery from a charging or usage issue. The evidence supplied for this part tells you what the battery is and which lamp it fits; it does not list charging steps or diagnostic tests, so treat the checks below as sensible starting points rather than manufacturer instructions.
The Muse 2.0 Replacement Battery is designed specifically for The Muse 2.0 Portable Lamp and is available to replace a broken or expired battery. That narrow fit is the most important fact here: this is not a universal battery, and it is not a part for other Tala lamps.
A sensible order of checks before you buy
Run through these in order. Each one either points toward a battery swap or rules it out, so you do not replace a part that was not the problem.
- Confirm the lamp model: The replacement battery is designed specifically for The Muse 2.0 Portable Lamp. Check that your lamp is the Muse 2.0 before going further; the part is not described as fitting other models.
- Rule out a charging routine problem: A lamp that seems to die early may simply not be getting a full charge. The supplied record does not include charging instructions, so follow the guidance that came with your lamp rather than guessing at charge times.
- Compare runtime against your own history: A gradual drop over months is the usual pattern of an aging battery. A sudden failure after a specific event is different and worth investigating before ordering.
- Check whether the battery is physically damaged: The record describes the part as available to replace a broken or expired battery. If you can see swelling, damage or a loose connector, stop using the lamp and seek qualified help rather than attempting a repair yourself.
- Decide whether a swap is justified: If the lamp is a Muse 2.0, the battery is clearly aging or damaged, and charging has been ruled out as far as you can, the replacement battery is the intended fix.
What the replacement battery actually is
- The Muse 2.0 Replacement Battery: The Muse Replacement Battery is a 57.7Wh 3.7V 1s6p with connector. The 3.7V rating and connector are the details that make this a drop-in part for the Muse 2.0 rather than a generic cell. Match the part to the lamp, not to a voltage that looks similar.

The Muse 2.0 Replacement Battery - The Muse 2.0 Replacement Battery: Designed specifically for The Muse 2.0 Portable Lamp, The Muse 2.0 Replacement Battery is available to replace a broken or expired battery. This is the compatibility statement to rely on. If your lamp is a different model, this battery is not the right purchase.
When a Muse 2.0 battery not charging points to a swap
A battery that will not charge at all is a stronger signal than one that simply runs down faster than it used to. But the supplied information does not include a troubleshooting sequence for charging faults, so it would be wrong to promise that a new battery fixes every non-charging lamp. What the record does confirm is that the replacement battery exists specifically to replace a broken or expired battery in the Muse 2.0.
If the lamp is under any applicable warranty or you are unsure whether the fault is the battery or the charging path, contact Tala support before ordering. A replacement battery is a part, not a diagnosis.
The swap itself: what to expect and what to confirm
The battery is supplied with a connector, which indicates it is intended to connect to the lamp's existing wiring rather than be soldered or adapted. The supplied record does not include step-by-step installation instructions, torque values, or any statement about whether the swap is user-serviceable. Before you open anything, check the documentation that came with your Muse 2.0 and follow it.
If the manufacturer's instructions require a qualified installer, or if you are not confident working with the connector and housing, have the swap done professionally. Do not improvise a procedure from a product page.
Keeping the new battery in good shape
The supplied record does not include care instructions for this battery, so these are general habits rather than manufacturer requirements. They are the same habits that help any rechargeable lamp battery last.
- Avoid leaving the lamp fully drained for long periods: Rechargeable cells generally prefer to be stored with some charge rather than completely flat. The record does not specify a storage voltage, so use your judgment and the lamp's own guidance.
- Keep the lamp within normal room conditions: Extreme heat and cold are hard on batteries. The record does not give a temperature range, so do not treat any specific figure as official.
- Do not force the connector: The battery is supplied with a connector designed for the Muse 2.0. If it does not seat naturally, stop and check that you have the right part rather than applying force.
- Recycle the old battery properly: A replaced lithium battery should go to a proper battery recycling point, not household waste. The record does not give a disposal procedure, so follow local rules.
What the record does not settle
The supplied information confirms the part number, the 57.7Wh 3.7V 1s6p specification, the connector, and the Muse 2.0 fit. It does not state expected runtime after replacement, charging time, warranty terms, or whether installation is covered. If any of those matter to your decision, ask Tala before you order rather than assuming.
For most owners, the decision comes down to one question: is this a Muse 2.0 with a battery that has reached the end of its useful life? If yes, the Muse 2.0 Replacement Battery is the part designed for that job.


