Start with the Right G4 Bulb
Replacing a G4 LED bulb in technical lighting is straightforward once you confirm the bulb base and the fixture's requirements. The G4 is a bi-pin bulb with two small pins on the base, commonly found in under-cabinet lights, picture lights, and certain pendant fixtures. Before you order a replacement, check that your fixture is designed for G4 bulbs and note the color temperature you prefer—options like 2200K, 2700K, or 3000K affect the light's warmth.
The Tala G4 LED Bulb and the Tala G4 LED Bulb - RT both use 2.5 Watts to deliver 360 lumens, making them efficient upgrades for older halogen G4 bulbs. Both offer Tala's signature smooth dimming and gallery-quality color rendering, so you can match the look of a halogen without the heat or energy use.
Step-by-Step Replacement
The exact steps depend on your fixture, but these checkpoints apply to most G4 installations. Always turn off power at the circuit before handling any bulb.
- Turn off power: Switch off the circuit breaker or unplug the fixture to ensure no live current reaches the socket.
- Remove the old bulb: Gently pull the old G4 bulb straight out of its socket. The two pins should release without twisting.
- Check the socket and pins: Inspect the socket for damage or debris. Make sure the new bulb's pins are straight and clean.
- Insert the new bulb: Align the pins with the socket holes and push gently until the bulb sits firmly. Avoid forcing; it should slide in smoothly.
- Restore power and test: Turn the power back on and switch on the light. If it doesn't work, turn off power and recheck the connection.
Choosing the Right Color Temperature
Color temperature changes the mood of a space. Tala offers both the G4 LED Bulb and the G4 LED Bulb - RT in 2000-3000K, 2200K, 2700K, and 3000K variants. The 2000-3000K option is a dim-to-warm version that shifts from warm to very warm as you dim, mimicking halogen behavior. If you prefer a consistent tone, choose a fixed temperature like 2700K for a classic warm white or 3000K for a slightly cooler, more neutral light.
For technical lighting—such as under-cabinet task lights or display fixtures—color rendering matters. Both Tala G4 bulbs deliver CRI 97 (R9 97), which means colors appear vivid and accurate, ideal for artwork or task areas where true color is important.
What Tala's G4 Bulbs Offer
- G4 LED Bulb: The Tala G4 uses 2.5 Watts to deliver 360 lumens, with CRI 97 (R9 97) and smooth dimming. This efficiency and color quality make it a strong replacement for halogen G4 bulbs in technical fixtures.

G4 LED Bulb - G4 LED Bulb - RT: The Tala G4 LED Bulb - RT also uses 2.5 Watts for 360 lumens, with the same high color rendering and dimming performance. The -RT variant offers the same performance, giving you a choice of color temperature options to match your fixture and mood.

G4 LED Bulb - RT
Compatibility and Safety Notes
Before purchasing, confirm your fixture accepts G4 bi-pin bulbs and that the socket is rated for LED use. If your fixture is hardwired, any wiring changes must be done by a qualified installer—replacing a bulb is not a wiring job. The G4 bulb itself is a simple swap, but if your fixture requires transformer or driver compatibility, check the manufacturer's instructions for your specific light.
Both Tala G4 bulbs are built with heat-dissipating ceramic, which helps extend their lifetime. This design is particularly useful in enclosed or tight spaces common in technical lighting. Always allow the bulb to cool before handling, and if you're unsure about your fixture's compatibility, consult the product documentation or a professional electrician.



