How to Install a Root Rod for a Ceiling Fixture

By Tala | Shop Official Tala® Lighting | Light to Live By – Tala US | Published: 2026-10-29

Category: How-to Guides

Learn how to install a Tala Root Rod to extend your Root Chandelier's drop length by 13 inches. Step-by-step instructions with common mistakes to avoid.

Quick Answer

To install a Root Rod, first turn off power to the fixture, then attach the rod to the chandelier's existing stem, and finally reconnect and secure the fixture. Always verify the rod is tightly threaded to avoid sagging.

Why Extend the Drop Length?

A Root Rod is a simple accessory that adds 13 inches to the drop of your Root Chandelier. This is useful when you need to lower the fixture to suit a higher ceiling or to position the light exactly where you want it in a room.

Before you start, check that your ceiling height and the chandelier's current drop will work with the extra length. The rod is available in a Brass finish, so it blends with the chandelier's look.

What You Need to Know Before Starting

The Root Rod is designed specifically for the Root Chandelier, so it's not a universal part. Make sure you have the correct model before purchasing.

You'll need basic tools: a ladder, a screwdriver (likely Phillips), and possibly pliers for tightening. Always turn off the circuit breaker to avoid electrical shock.

Step-by-Step Installation Guide

Step 1: Turn Off Power: Switch off the circuit breaker that supplies power to the ceiling fixture. Use a voltage tester to confirm the wires are not live before touching anything. Never skip this step—working with live wires is dangerous.
Step 2: Remove the Chandelier: Carefully detach the chandelier from the ceiling canopy. Support its weight with one hand while loosening the mounting screws and disconnecting the wire nuts. Lower the fixture to a safe, padded surface. Have a helper hold the fixture if it feels heavy to avoid dropping it.
Step 3: Attach the Root Rod: Screw the Root Rod onto the existing stem of the chandelier. The rod adds 13 inches of length. Tighten it securely by hand, then use pliers (wrapped in tape to avoid scratches) for a final firm turn. Check that the threads are aligned to avoid cross-threading, which can damage the rod.
Step 4: Reconnect and Mount: Lift the chandelier back up, route the wires through the rod and canopy, and reconnect the wire nuts (matching colors). Secure the fixture to the ceiling bracket with the mounting screws. Ensure no bare wire is exposed after connecting—tug gently on each wire to confirm a solid connection.
Step 5: Test and Adjust: Turn the power back on and test the chandelier. If it hangs unevenly, adjust the rod or canopy until it sits level. Tighten any loose screws. If the light flickers, turn off power and recheck your wire connections—this is a sign of a loose connection.

Product Facts

Accessory - Root Rod - RT: The Tala Root Rod is an accessory for the Root Chandelier, designed to add to its drop length. It extends the chandelier's reach by 13 inches and comes in a Brass color option. This gives you the flexibility to hang your chandelier at the perfect height for your room, even if the standard drop isn't enough.
Accessory - Root Rod - RT